SELF CLINCH NUT

Version: H-S

Generel Info:

Designed for installation into sheet metal.

Versions:

H-S

Materials:

Steel/zinc H-S

Stainless Steel H-CLS

Grade 400 Stainless Steel H-SP

Advantages:

Ideal for both thinner and harder sheet metals.

Can be installed by hand or automatic methods.

Suitable for use in punched or drilled holes.

Can be used for sheet thickness up to 3.0mm.

Can be installed closed to edge of sheet.

Provides an almost flush finish.

When ordering:

Please state:  Version + Thread size + Sheet Thickness + Material

All data is correct to the best of our knowledge, however Headland cannot be held responsible for any errors or omissions.

Thread

B

D

H

h

Sheet

Recommended

Distance

Note!

Size

Max.

± 0.2

± 0.10

Max.

Thickness

hole size

centre line hole

Min.

 + 0.08 – 0.00

to sheet edge

mm

mm

mm

mm

mm

mm

mm

M2

4.22

6.3

1.5

0.76

0.8

4.25

4.8

Non-standard

M2

4.22

6.3

1.5

0.97

1.0

4.25

4.8

Non-standard

M2

4.22

6.3

1.5

1.37

1.4

4.25

4.8

Non-standard

M2.5

4.22

6.3

1.5

0.76

0.8

4.25

4.8

Non-standard

M2.5

4.22

6.3

1.5

0.97

1.0

4.25

4.8

Non-standard

M2.5

4.22

6.3

1.5

1.37

1.4

4.25

4.8

Non-standard

M3

4.22

6.3

1.5

0.76

0.8

4.25

4.8

M3

4.22

6.3

1.5

0.97

1.0

4.25

4.8

M3

4.22

6.3

1.5

1.37

1.4

4.25

4.8

M3ALT

4.73

7.1

1.5

0.76

0.8

4.75

5.6

M3ALT

4.73

7.1

1.5

0.97

1.0

4.75

5.6

M3ALT

4.73

7.1

1.5

1.37

1.4

4.75

5.6

M4

5.38

7.9

2.0

0.76

0.8

5.4

6.9

M4

5.38

7.9

2.0

0.97

1.0

5.4

6.9

M4

5.38

7.9

2.0

1.37

1.4

5.4

6.9

M5

6.38

8.7

2.0

0.76

0.8

6.4

7.1

M5

6.38

8.7

2.0

0.97

1.0

6.4

7.1

M5

6.38

8.7

2.0

1.37

1.4

6.4

7.1

M6

8.72

11.05

4.1

1.37

1.4

8.75

8.6

M6

8.72

11.05

4.1

2.21

2.3

8.75

8.6

M8

10.44

12.65

5.5

1.37

1.4

10.5

9.7

M8

10.44

12.65

5.5

2.21

2.3

10.5

9.7